Canon imagePROGRAF PRO-2000 Online Manual page 600

4. If necessary, complete the following settings:
Account ID
Enter the account ID to be set. Enter the ID by using up to 20 alphanumeric characters (0 to 9, a
to z, and A to Z).
Prohibits Account ID changes
Prohibits changes to account IDs that have already been set.
Check this check box to prevent other users from changing IDs.
5. Apply the settings
Click OK.
The Device Settings tab is displayed again.
The settings are enabled hereafter.
Note
• Accounting can be set only by users with Administrator rights.
Users without Administrator rights may not be able to set Accounting information.
600