Page Setup Tab Description - Canon imagePROGRAF PRO-2000 Online Manual

Page Setup Tab Description

The Page Setup tab allows you to set borderless printing for a document and specify the scaling.
Settings Preview
The paper illustration shows how the original will be laid out on a sheet of paper.
You can check an overall image of the layout.
The printer illustration shows how to load paper to match the printer driver settings.
Check whether the printer is set up correctly by looking at the illustration before you start printing.
Page Size
Selects a page size.
Ensure that you select the same page size as you selected within the application.
When you select Custom Size from Custom Paper Size, the
appears, and you can specify any vertical and horizontal dimensions for the paper.
Borderless Printing
Chooses whether you are printing on a full page without any page margins or printing with page
margins.
In borderless printing, originals are enlarged to extend slightly off the paper. Thus, printing can be
performed without any margins (border).
Important
• When Cut Sheet is selected for Paper Source, Borderless Printing is grayed out and cannot be
set.
Borderless Setting
Select Borderless Printing to enable it for clicking.
Open the Borderless Setting dialog
Borderless Printing Method
This appears when you select Borderless Printing.
Set the borderless printing method.
box, so that you can adjust Amount of Extension.
618
Custom Size Settings dialog box