printing with no problems.
Moving the slider to the left reduces the amount of extension and expands the range of the document
Roll Paper Options dialog box
You can specify settings for printing on roll paper.
You can print cut guidelines for cutting the roll paper automatically or manually after printing.
Cut the roll paper automatically after printing.
Do not cut the roll paper automatically after printing.
Print Cut Guideline
Prints cut guidelines for cutting the roll paper manual after printing.
Select this check box to print documents extending over several pages as one continuous document
without any spaces between the pages.
Output Method dialog box
You can select Output Method and specify save settings for saving documents to a box.
After print ends, the print job is saved to the printer's hard disk drive.
Save in Job Box
The print job is saved to the printer's hard disk drive. If you selected Save in Job Box, select an
individual box number as the save destination from the Job Box list.
Print after reception is complete
If you selected Print, you can specify this setting.
By selecting this check box, you can prevent the print quality from dropping if the print job
reception is cut off or if printing is interrupted.
Name of data to be saved
Use file name
The file name is used as-is.
You can set a new name. Enter the save name in Name.
The box list appears. If you selected Save in Job Box, select an individual box number as the save
destination from the list.
Acquire Job Box Name
When you click this, Job Box displays the box name that was obtained from the printer.