I Want To Know How To Configure Roll Cutting - Canon imagePROGRAF PRO-2000 Online Manual

I want to know how to configure roll cutting.

Cutting methods can be selected in the printer settings and printer driver settings.
To automatically cut roll paper after printing, open the Cutting mode settings on the printer, and then under
Automatic cut set Automatic Cutting in the printer driver to Yes.
When using paper that is easily scratched, or paper where the ink requires extra time to fix, we recommend
setting Cutting mode on the printer to Eject cut.
Specifying the Cutting Method for Rolls
Cutting Roll Paper after Printing
Cutting Roll Paper after Printing (Mac OS)
If using the Media Take-up Unit, see the pages below for cutting settings and rolling settings after cutting.
Switching Roll Unit Modes
Removing Printed Paper from the Roll Unit
(Windows)
692