Removing Printed Paper From The Roll Unit - Canon imagePROGRAF PRO-2000 Online Manual

Removing Printed Paper from the Roll Unit

Note
• By tapping the paper settings display area and then
Wind up after cutting to Enable in advance, you can omit steps 6 and 7 below, because when the
paper is cut after printing, the next paper will be automatically taken up after that. However, be careful
when using easily damaged roll paper because the roll paper touches the roller when paper is cut.
1. Tap paper settings display area on Home screen of touch screen.
Important
• If the Home screen does not appear, tap the Home button.
2. Tap area.
3. Tap Feed/cut.
4. Tap Advance or Rewind to advance roll paper a little.
With the winding direction set to outward winding, advance the length of one circumference of the roll or
more to protect the print side.
5. Tap Cut paper.
area when setting Take-up mode and setting
130