• Depending on the media type, you may obtain the same print results even when you change the
Rendering Intent setting.
• If Driver Matching is selected for Color Correction, then Relative Colorimetric and Absolute
Colorimetric are not displayed.
Clear Coating Tab
Specify Clear Coating settings.
When you execute clear coating, the printer applies chroma optimizer (CO) ink onto the printing surface
and allows you to adjust the glossiness.
Clear Coating Area
Set the clear coating area.
The printer automatically sets the areas to be clear-coated and whether clear coating is to be
It may be possible to reduce the ink consumption of the chroma optimizer (CO) or to accelerate
the print speed.
The printer clear-coats the entire print area.
If selecting Auto produced unsatisfactory clear coating effects, selecting Overall may improve
• The selection of Overall may be disabled depending on the media type and the print quality.