Cutting Roll Paper after Printing
The procedure for cutting roll paper automatically and printing cut guidelines is as follows:
1. Open the
printer driver setup window
2. Select the paper source
For Paper Source on the Page Setup tab, select the setting that matches your purpose from Roll Paper
(Auto), Roll 1, and Roll 2.
• The paper feed method will differ according to the paper or lower level (roll paper 2) settings, or
roll unit option settings.
3. Display Roll Paper Options dialog box
Click Roll Paper Options to display the Roll Paper Options dialog box.
4. Set auto cut
From Automatic Cutting, select the item that matches your purpose.
The current settings are displayed in the settings preview on the left side of the Page Setup tab.
The roll paper is cut automatically after printing.