Canon imagePROGRAF PRO-2000 Online Manual page 195

3. Open web browser on your smartphone, tablet, or computer and enter IP address.
Enter as following in the URL field of the web browser.
http://XXX.XX.X.XXX
Enter the IP address in "XXX.XX.X.XXX".
When you access, "Remote UI" will be displayed on the web browser on your smartphone, tablet, or
computer.
4. If you display Remote UI for the first time on your smartphone, tablet, or computer, select
For secure communication.
Download the root certificate, and then register it.
Registering Printer's Root Certificate to Web Browser
Note
• Once you register the root certificate to the web browser on your smartphone, tablet, or computer,
this step is not necessary after the next time.
• If the root certificate is not registered, a message to warn you that the secure connection is not
guaranteed may appear.
5. Select Log on.
The password authentication screen appears.
Note
• When the standard user mode is enabled, choose either administrator mode or standard user
mode to log on.
After choosing a mode and selecting Log on, the password authentication screen of each mode
appears.
6. Enter password.
When the password authentication is complete, the menus that can be utilized are displayed on the web
browser.
Important
• The password is set at the time of purchase. The password is the printer serial number. The
printer serial number is printed on the sticker attached on the printer. It consists of 9 alphanumeric
characters (four alphabets followed by five numbers).
For details on setting password, see
7. Check printer status and change printer settings.
For changeable setting items, see below.
Changeable Setting Items Using Web Browser
Setting Password.
195