Changing Lan Connection Method/Changing Wireless Lan Connection Method (Windows) - Canon imagePROGRAF PRO-2000 Online Manual

Changing LAN Connection Method/Changing Wireless LAN
Connection Method (Windows)
Changing LAN Connection Method
Changing Wireless LAN Connection Method
Changing LAN Connection Method
Follow either procedure below to change LAN connection method (wired or wireless).
• For Windows:
◦ Use the Setup CD-ROM or follow the instructions on the Canon website to redo setup.
◦ Tap LAN settings and Change LAN in this order on the HOME screen, and then select Activate
wireless LAN or Activate wired LAN.
After that, perform settings on the Protocol Settings... screen on IJ Network Device Setup Utility.
For details, refer to
LAN Settings.
• For Mac OS:
Follow the instructions on the Canon website to redo setup.
Changing Wireless LAN Connection Method
Follow either procedure below to change wireless LAN connection method (infrastructure or direct
connection).
• For Windows:
◦ Use the Setup CD-ROM or follow the instructions on the Canon website to redo setup.
◦ Perform settings on the Protocol Settings screen on IJ Network Device Setup Utility.
Important
• Before you perform settings using IJ Network Device Setup Utility, turn on cableless setup
mode on the printer following the procedure below.
1. Make sure printer is turned on.
2. Flick HOME screen and tap
If you specify the administrator password, enter the password.
3. Tap Wireless LAN setup.
4. Tap Cableless setup.
5. Check message and tap OK.
Follow instructions on your smartphone or tablet.
6. If message saying setup is completed appears, tap OK.
Performing/Changing Wireless LAN Settings
Menu Operations
LAN settings.
248
or Performing/Changing Wired