Canon imagePROGRAF PRO-2000 Online Manual page 845

2130
Cause
The roll paper width set in the print job is not the same as the width of the roll paper in the printer.
What to Do
Tap OK on the touch screen.
Check the Page size and Type in the print job that appears on the touch screen, and then tap OK.
• Continuing to print
Tap Print with the loaded paper. to go ahead and print on the loaded paper.
However, note that this error may cause paper jams and affect the printing quality.
• Replacing the paper roll and printing
Tap Replace the paper and print, and then replace the paper with roll paper of the width specified in
the print job Page size settings.
Removing the Upper Roll from the Printer
Removing the Lower Roll from the Roll Unit (Option)
Removing Rolls From the Roll Holder
Loading Rolls on the Roll Holder
Loading the Upper Roll on the Printer
Loading the Lower Roll on the Roll Unit (Option)
• Stopping printing
Tap Cancel on the touch screen or press the Stop button.
Note
• To change print settings in Windows, select Fit Roll Paper Width in the printer driver and set the roll
paper width in the dialog box that appears.
• To change print settings in Mac OS, open the printer driver and select Fit Roll Paper Width, and then
set the roll paper width in that panel to the width of the paper loaded in the printer.
• To suppress this message, set Detect paper setting mismatch in the touch screen menu to Do not
detect.
Menu Structure
845