Canon imagePROGRAF PRO-2000 Online Manual page 182

Select whether B4 or 10 inch is applied when a sheet of an intermediate size is detected.
• Adjust roll unit
Select this setting item when you replace the roll unit.
• Print advanced paper settings
Tapping Yes prints out each setting specified in Advanced paper settings.
• Reset paper settings for all paper
Tapping Yes initializes each setting specified in Advanced paper settings.
Entering the administrator password is required if it is enabled.
Important
• When you set the paper settings back to the factory default, added or updated paper information
using Media Configuration Tool is erased.
In addition, the color calibration values are also erased.
Perform color calibration to specify the color calibration values.
182