Canon imagePROGRAF PRO-2000 Online Manual page 612

30sec. / 1min. / 3min. / 5min. /
10min. / 30min. / 60min.
Between Scans
The wait time until printing next line can be set after printing one line in page. Set in the event
smudging occurs in the page, unevenness occurs in borderless printing, etc., and you would like
to avoid this smudging and unevenness.
Setting Items
Printer Default
None
1sec. / 3sec. / 5sec. /
7sec. / 9sec.
Roll Paper Safety Margin
In order for heavily curling paper to absorb well in platen, length of margin established on edge of
paper can be selected.
Leading Edge Margin
Roll Leading Edge Margin length can be set.
Setting Items
Printer Default Settings in printer unit control panel are applied.
3mm
20mm
Cut Speed
Select auto-cut speed. This can be adjusted when paper cannot be cut precisely with auto-cut.
Setting Items
Printer Default Settings in printer unit control panel are applied.
Fast
Standard
Slow
Settings in printer unit control panel are applied.
Next line will be print immediately after first line is print.
Next line will be print after the set amount of time has passed after printing
one line.
* If smudges and/or unevenness occur, please increase time.
Will be print in standard size.
* Please select when there are no particular problems with printing.
Please select when rubbing of the print heads occurs, such as when heavily curling
paper is being used.
Select when cut is not smooth with Standard settings.
Select when there are no particular problems with auto-cut.
If this is selected for paper with adhesive, the cutter will not stick to the adhesive easily and
it will slow deterioration of the cutter's capabilities.
Page will be output after set amount of time has passed after
printing.
Content
Content
Content
612