8. Close top cover.
9. Tap Start feeding.
The paper is now advanced.
10. Once paper feeding starts, you will need to do the following, based on the Manage
remaining roll amount setting and the barcode printed on rolls. (See
the Amount of Roll Paper
Barcodes Printer Operation After the Paper is Fed
• Cut the edge of the roll using the Cut paper function if the edge is creased or soiled. (See
"Specifying the Cutting Method for
A menu for selecting the media type appears on the touch
Operate the touch screen and select the media type to be used.
The type and amount of paper left is automatically detected
based on the barcode printed on the roll.
There is no need to specify the type and length of the paper.
A menu for selection of the media type and length is shown on
the touch screen.
Operate the touch screen, select the media type to be used, and
enter its length.
"Keeping Track of