Image edges are blurred or white banding occurs
Paper may be gripped too strongly over the platen
Set a lower Transport unit vacuum strength in the touch screen menu.
Adjusting Vacuum Strength
Check if the print head is in the right position
For detailed printing of small text or fine lines on glossy or semi-gloss photo paper or proof paper, set the print
head to the optimal height and then adjust the position of the print head.
Adjusting the Print Head
Setting a lower value for Paper Thickness (Head Height) in the touch screen menu may resolve the problem.
Troubleshooting Paper Abrasion and Blurry Images
Is the media type specified in the printer driver the same as the media type loaded in the
Load the printer with the media type specified in the printer driver.
Loading the Upper Roll on the Printer
Loading Sheets in the Printer
Follow the steps below to match the media type in the printer driver to the media type loaded in the printer.
1. To stop printing, press the Stop button.
2. Reset the media type in the printer driver, and then print.