Displaying And Hiding Positions - Siemens SINUMERIK 828D Operating Manual

Programming technology functions (cycles)
9.1 Drilling
Parameter
X0
C0
Y0
Z0
α0
α1
N
R
Positioning
(only for ShopTurn)
9.1.15

Displaying and hiding positions

Function
You can hide any positions in the following position patterns:
● Position pattern line
● Position pattern grid
● Position pattern frame
● Full circle position pattern
● Pitch circle position pattern
The hidden positions are skipped when machining.
Display
The programmed positions of the position pattern are shown as follows in the programming
graphic:
x
o
Selecting positions
You have the option of either displaying or hiding positions - by activating the checkbox in
the displayed position table either using the keyboard or mouse.
352
Description
Peripheral surface Y:
X coordinate of the reference point (abs)
Positioning angle for machining surface
Y coordinate of the reference point (abs)
Z coordinate of the reference point (abs)
Starting angle for first position referred to the Y axis.
Positive angle: Circle is rotated counter-clockwise.
Negative angle: Circle is rotated clockwise.
Incrementing angle
Number of positions
Radius
Straight line: Next position is approached linearly in rapid traverse.
•
Circular: Next position is approached along a circular path at the
•
feedrate defined in the machine data.
Position is activated = displayed (position is shown as a cross)
Position deactivated = hidden (position shown as a circle)
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Unit
mm
Degrees
mm
mm
Degrees
Degrees
mm
Turning