Tool Selection For The Manual Mode - Siemens SINUMERIK 828D Operating Manual
Computerized numerical controller for machine tools
Hide thumbs
Also See for SINUMERIK 828D:
- Function manual (1799 pages) ,
- Commissioning manual (1167 pages) ,
- Programming manual (822 pages)
Table of Contents
Advertisement
Working with a B axis (only 840D sl)
16.7 Tool selection for the manual mode
16.7
Tool selection for the manual mode
For the preparatory actions in the manual mode, tool selection and spindle control are both
performed centrally in the T, S, M window.
Figure 16-1
Procedure
See also
Selecting a tool and spindle (Page 109)
832
TSM window for the B and C axis
Aligning the milling and turning tool with β angle:
Press the <SELECT> key and select
• 0° or
• 90° or
• Value entry box to freely enter the angle.
Aligning the turning tool with γ angle:
Press the <SELECT> key and select
• 0°
• 180°
• Value entry box to freely enter the angle.
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Turning
Advertisement
Table of Contents
