Setting The Multi-Channel View - Siemens SINUMERIK 828D Operating Manual

Computerized numerical controller for machine tools

Hide thumbs Also See for SINUMERIK 828D:

Table of Contents

2-channel display

Unlike the smaller operator panels, the T,F,S window is visible for a 2-channel view in the

"Machine" operating area.

Program operating area

You can display as many as ten programs next to each other in the editor.

Displaying a program

You can define the width of the program in the Editor window using the settings in the editor.

This means that you can distribute programs evenly - or you can widen the column with the

active program .

Channel status

When required, channel messages are displayed in the status display.

Setting the multi-channel view

Channel selection and

(for "2 - 4 channels"

(for "2 - 4 channels"

Operating Manual, 01/2015, 6FC5398-8CP40-5BA2

Machine manufacturer

Please refer to the machine manufacturer's specifications.

Here, you specify how many channels are displayed.

You specify which channels in which sequence are displayed in the multi-

channel view.

Here, you specify which channels are displayed in the multi-channel view.

You can quickly hide channels from the view.

Multi-channel machining

10.1 Multi-channel view

Sinumerik 840d sl