Siemens SINUMERIK 828D Operating Manual page 827

Computerized numerical controller for machine tools

Hide thumbs Also See for SINUMERIK 828D:

Table of Contents

Axis sequence

Other additive transformations can be added to the offsets before (X0, Y0, Z0) or after (X1,

Y1, Z1) swiveling (see Section "Work offsets").

Operating Manual, 01/2015, 6FC5398-8CP40-5BA2

Tool identifier

Retraction plane for face B

Positioning angle for machining surface

Reference point for rotation

axis-by-axis: Swivel coordinate system axis-by-axis

Solid angle: Swivel via solid angle

Proj. angle: Swiveling via projection angle

Direct: Position rotary axes directly

Sequence of the axes which are rotated around - (only for axis-by-axis swivel

XYZ or XZY or YXZ or YZX or ZXY or ZYX

New zero point of rotated surface

Working with a B axis (only 840D sl)

The sequence of the axes can be inter-

changed as required using the Select

16.4 Swiveling

Sinumerik 840d sl