Siemens SINUMERIK 828D Operating Manual page 763

Entry
Softkey icon
Text file
Text context
Procedure
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
No icon
sk_usb_front.png
sk_local_drive.png
sk_network_drive_ftp.png
slpmdialog
SlPmDialog
1. Select the "Start-up" operating area.
2. Press the "HMI" and "Log. drive" softkeys.
The "Set Up Drives" window opens.
3. Select the softkey that you want to configure.
4. To configure softkeys 9 to 16 or softkeys 17 to 24, click the ">> level"
softkey.
5. To allow entry fields to be edited, press the "Change" softkey.
6. Select the data for the corresponding drive or enter the necessary data.
7. Press the "Details" softkey if you want to enter additional parameters.
Press the "Details" softkey to return to the "Set Up Drives" window.
8. Press the "OK" softkey.
The entries are checked.
Managing programs
13.12 Set up drives
Description
No icon is displayed on the softkey.
File names of the icon displayed on the soft-
key.
File for softkey dependent on the language. If
nothing is specified in the input fields, the text
appears on the softkey as was specified in
the input field "Softkey text".
763