Siemens SINUMERIK 828D Operating Manual page 277

Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
6. Enter the following contour elements and acknowledge using the "Ac-
cept" softkey.
6.1 X 48 abs
6.2 α2 90°
6.3 Direction of rotation
R 23 abs
Afterwards, entry fields are inactive.
6.4 Using the "Dialog selection" softkey, select a required contour element
and confirm using the "Dialog accept" softkey. The entry fields are ac-
tive again. Enter the additional parameters.
FS 2
6.5 Z -80 abs
6.6 X 90 abs
6.7 Z -95 abs
7. Press the "Accept" softkey.
Finished-part contour
Creating a ShopTurn program
8.18 Example: Standard machining
FS 3
X 60 abs
R 6
Z -85 abs FS 3
K -35 abs I 80 abs
277