Reading In An Archive In The Program Manager - Siemens SINUMERIK 828D Operating Manual

Computerized numerical controller for machine tools

Hide thumbs Also See for SINUMERIK 828D:

Table of Contents

Reading in an archive in the Program Manager

In the "Program Manager" operating area, you have the option of reading in archives from

the archive folder of the system data as well as from configured USB and network drives.

Operating Manual, 01/2015, 6FC5398-8CP40-5BA2

Select the required location for archiving and press the "New directory"

softkey to create a suitable subdirectory.

The "New Directory" window opens.

Enter the required name and press the "OK" softkey.

The directory is created below the selected folder.

Press the "OK" softkey.

The "Generate Archive: Name" window opens.

Select the format (e.g. archive ARC (binary format) for 840D sl and/or

Archive ARC for 828D), enter the desired name and press the "OK"

softkey to archive the file(s).

A message informs you if archiving was successful.

Press the "OK" softkey to confirm the message and end the archiving

An archive file in the .ARC (840D sl) or .ARD (828D) format type is cre-

ated in the selected directory.

Software option

In order to read-in user archives in the "Program Manager" operating area,

you require the option "Additional HMI user memory on CF Card of NCU" (not

for 840D sl / SINUMERIK Operate on PCU50 / PC).

Select the "Program Manager" operating area.

Press the "Archive" and "Read in archive" softkeys.

The "Read in archive: Select archive" window opens.

Select the archive storage location and position the cursor on the

required archive.

Note: When the option is not set, the folder for user archives is

only displayed if the folder contains at least one archive.

Managing programs

13.16 Backing up data

Sinumerik 840d sl