Easy Extend (828D Only); Overview - Siemens SINUMERIK 828D Operating Manual

Easy Extend (828D only)

22.1

Overview

Easy Extend enables machines to be retrofitted with additional units, which are controlled by
the PLC or that require additional NC axes (such as bar loaders, swiveling tables or milling
heads), at a later point in time. These additional devices are easily commissioned, activated,
deactivated or tested with Easy Extend.
The communication between the operator component and the PLC is performed via a PLC
user program. The sequences to be executed for the installation, activation, deactivation and
testing of a device are stored in a statement script.
Available devices and device states are displayed in a list. The view of the available devices
can be controlled for users according to their access rights.
The subsequent chapters are selected for example only and are not available in every
statement list.
Up to 64 devices can be managed.
References
SINUMERIK 828D Turning and Milling Commissioning Manual
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Machine manufacturer
Please refer to the machine manufacturer's specifications.
22
877