Siemens SINUMERIK 828D Operating Manual page 337

Computerized numerical controller for machine tools

Hide thumbs Also See for SINUMERIK 828D:

Table of Contents

You program in YZC if the Y axis should also move during machining. A value can be

specified for each position.   In addition to the possibilities of ZC, the following is also possible,

for example.

Operating Manual, 01/2015, 6FC5398-8CP40-5BA2

Holes pointing toward the center

Y axis is not centered above the cylinder

Programming technology functions (cycles)

9.1 Drilling

Sinumerik 840d sl