Programming technology functions (cycles)
9.7 Additional cycles and functions in ShopTurn
9.7.7
Mirroring
Furthermore, you can mirror all axes. Enter the axis to be mirrored in each case.
Note
Travel direction of the milling cutter
Note that with mirroring, the travel direction of the cutting tool (conventional/climb) is also
mirrored.
New mirroring
Table 9- 2
Parameters
Mirroring
Z
X
Y
586
Description
New
•
New mirroring
Additive
•
Additive mirroring
Mirroring of the Z axis, on/off
Mirroring of the X axis, on/off
Mirroring of the Y axis, on/off
Additive mirroring
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Unit
Turning