Siemens SINUMERIK 828D Operating Manual page 590

Programming technology functions (cycles)
9.7 Additional cycles and functions in ShopTurn
Parameters
T
D
S1 / V1
Plane selection
∅
C0
CP
590
Enter the positioning angle for the CP machining area if you selected
machining plane face Y.
- OR -
Enter reference point C0 if you selected the machining plane peripheral
surface Y.
- OR -
Choose whether the spindle should be clamped or released or whether
there should be no change (input field left blank).
Press the "Accept" softkey.
The values are saved and the window is closed. The process plan is
displayed and the newly generated program block is marked.
Description
Tool name
Cutting edge number
Spindle speed or
constant cutting rate
Select between the following machining surfaces:
Peripheral surface/Peripheral C
•
Peripheral surface Y - only if there is a Y axis
•
Face/Face C
•
Face Y - only if there is a Y axis
•
Turning
•
Diameter of the cylinder (for peripheral surface/peripheral surface C)
Positioning angle for machining area (for peripheral surface Y)
Positioning angle for machining area (for face Y)
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Unit
rpm
m/min
mm
Degrees
Degrees
Turning