Exit Remote Diagnostics - Siemens SINUMERIK 828D Operating Manual

Alarm, error and system messages
14.9 Remote diagnostics
Procedure
References
Commissioning Manual SINUMERIK Operate (IM9) / SINUMERIK 840D sl
14.9.4

Exit remote diagnostics

Procedure
804
1. The "Remote diagnostics (RCS)" window is opened.
2. Press the "Request remote diagnostics" softkey.
The "Request remote diagnostics" window is displayed.
3. Press the "Change" softkey if you would like to edit the values.
4. Press the "OK" softkey.
The request is sent to the remote PC.
1. The "Remote diagnostics (RCS)" is opened and it is possible that re-
mote monitoring or remote access is active.
2. Block the modem access if access via modem is to be blocked.
- OR -
In the "Remote Diagnostics (RCS)" window, reset the access rights to
"Permit no remote access".
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Turning