Alarm, Error And System Messages; Displaying Alarms - Siemens SINUMERIK 828D Operating Manual

Alarm, error and system messages

14.1

Displaying alarms

If faulty conditions are recognized in the operation of the machine, then an alarm will be
generated and, if necessary, the machining will be interrupted.
The error text that is displayed together with the alarm number gives you more detailed
information on the error cause.
Dangers for persons and machines
Please check the situation in the plant on the basis of the description of the active alarm(s).
Eliminate the cause/s of the alarm/s and acknowledge it/them as instructed.
Failure to observe this warning will place your machine, workpiece, stored settings and
possibly even your own safety at risk.
Alarm overview
You can display all upcoming alarms and acknowledge them.
The alarm overview contains the following information:
● Date and time
● Cancel criterion
specifies the key or softkey used to acknowledge the alarm
● Alarm number
● Alarm text
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
CAUTION
14
785