Siemens SINUMERIK 828D Operating Manual page 689

Computerized numerical controller for machine tools

Hide thumbs Also See for SINUMERIK 828D:

Table of Contents

Several magazines

If you have configured several magazines, the "Load to ..." window appears after pressing

the "Load" softkey.

If you do not want to use the suggested empty location, then enter your desired magazine

and magazine location. Confirm your selection with "OK".

Multiple load points

If you have configured several loading points for a magazine, then the "Load Point Selection"

window appears after pressing the "Load" softkey.

Select the required loading point and confirm with "OK".

Unloading tools

Operating Manual, 01/2015, 6FC5398-8CP40-5BA2

Place the cursor on the tool that you would like to unload from the mag-

azine and press the "Unload" softkey.

Select the required load point in the "Load Point Selection" window.

Confirm your selection with "OK".

Undo your selection with "Cancel".

Tool management

12.5 Tool list

Sinumerik 840d sl