Siemens SINUMERIK 828D Operating Manual page 706

Tool management
12.8 Magazine
706
Press the "Unload all" softkey.
A prompt is displayed as to whether you really want to unload, load or
relocate all tools.
3. Press the "OK" softkey to continue with unloading, loading or relocating
the tools.
The tools are unloaded from the magazine, loaded into the magazine or
relocated in ascending magazine location number order.
4. Press the "Cancel" softkey if you wish to cancel the unloading opera-
tion.
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Turning