Siemens SINUMERIK 828D Operating Manual page 127

Procedure
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1. A program is selected for execution and has been opened in the "Ma-
chine" operating area.
2. Press the "Basic blocks" softkey.
The "Basic Blocks" window opens.
3. Press the <SINGLE BLOCK> key if you wish to execute the program
block-by-block.
4. Press the <CYCLE START> key to start the program execution.
The axis positions to be approached, modal G functions, etc., are dis-
played in the "Basic Blocks" window for the currently active program
block.
5. Press the "Basic blocks" softkey once again to hide the window again.
Machining the workpiece
5.4 Displaying the current program block
127