Adjusting The Room Temperature Setpoint; Occupancy Button; Displaying Information - Siemens Albatros2 User Manual

Adjusting the room temperature setpoint

Occupancy button

Displaying information

Possible displays
38/221
Siemens Switzerland Ltd
HVAC Products
Turn the setting knob to increase or decrease the Comfort setpoint
and confirm by pressing the OK button. During active heating
mode, you can readjust Comfort setpoint "Heating", and during
active cooling mode, you can readjust Comfort setpoint "Cooling".
For the Reduced setpoint
Press the OK button
−
Select menu "Heating circuit" and
−
adjust the "Reduced setpoint"
−
After each readjustment, wait at least 2 hours, allowing the room temperature to adapt.
The Reduced setpoint can only be set in the case of heating mode. In cooling mode,
there is no Reduced setpoint, only the Comfort setpoint.
If, during the Comfort period, the rooms are not used for short
periods of time, you can press the occupancy button to lower the
room temperature, thus saving heating energy (changeover from
Comfort to Reduced setpoint), or saving cooling energy (changeover
from Comfort setpoint to OFF).
When the rooms are occupied again, press again the occupancy button to return to
normal heating (changeover from Reduced to Comfort setpoint), or to cooling
(changeover from OFF to Comfort setpoint).
In heating mode:
Heating to the Comfort setpoint
Heating to the Reduced setpoint
• The occupancy button is only active in automatic operation
• The current selection is active until the next switching action according to the heating
program takes place
Various data can be displayed by pressing the info button.
AUTO
Room temperature
0 4 8 12 16 20 24
Depending on the type of unit, configuration and operating state, some of the info lines
listed below may not appear.
Display:
• Possible error messages from the "Error code list" 169
• Possible service messages from the "Maintenance code list" 173
• Possible special mode messages
User manual RVS61.843
5 Handling
In cooling mode:
Cooling to the Comfort setpoint
Cooling OFF (no symbol)
CE1U2355en_02
23. November 2007