Default Settings For Manual Mode - Siemens SINUMERIK 828D Operating Manual

Working in manual mode

4.8 Default settings for manual mode

4.8 Default settings for manual mode
Specify the configurations for manual mode in the "Settings for manual operation" window.
Presettings
Settings
Type of feedrate
Default feedrate G94
Default feedrate G95
Variable increment
Spindle speed
Proceed as follows
See also
Switching the unit of measurement (Page 75)
122
Description
Here, you select the type of feedrate.
G94: Axis feedrate/linear feedrate
•
G95: Rev. feedrate
•
Enter the desired feedrate in mm/min.
Enter the desired feedrate in mm/r.
Enter the desired increment for axis traversal by variable increments.
Enter the desired spindle speed in rpm.
1. Select the "Machine" operating area.
2. Press the <JOG> key.
3. Press the menu forward key and the "Settings" softkey.
The "Settings for manual operation" window is opened.
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Turning