Siemens SINUMERIK 828D Operating Manual page 44

Introduction
2.4 User interface
Alarms and messages
Display
Second line
Display
The displays in the second line can be configured.
Third line
Display
44
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Description
Alarm display
The alarm numbers are displayed in white lettering on a red
background. The associated alarm text is shown in red letter-
ing.
An arrow indicates that several alarms are active.
An acknowledgment symbol indicates that the alarm can be
acknowledged or canceled.
NC or PLC message
Message numbers and texts are shown in black lettering.
An arrow indicates that several messages are active.
Messages from NC programs do not have numbers and appear
in green lettering.
Description
Program path and program name
Description
Display of channel status.
If several channels are present on the machine, the channel
name is also displayed.
If only one channel is available, only the "Reset" channel status
is displayed.
With touch operation, you can change the channel here.
Display of channel status:
The program was aborted with "Reset".
The program is started.
The program has been interrupted with "Stop".
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Turning