12.15.1
Tool list for multitool
If you work with a multitool, the tool list is supplemented by the column for the multitool
location number. As soon as the cursor is at a multitool in the tool list, certain column
headings change.
Column heading
Location
MT loc.
TYPE
Multitool name
Figure 12-20 Toll list with multitool in the spindle
Procedure
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Meaning
Magazine/location number
Multitool location number
Symbol for multitool
Name of the multitool
1.
Select the "Parameter" operating area.
2.
Press the "Tool list" softkey.
The "Tool List" window opens.
Tool management
12.15 Working with multitool
721