Siemens SINUMERIK 828D Operating Manual page 529

Procedure
Parameters, G code program
PL Machining plane
RP Retraction plane
SC Safety clearance
F Feedrate
Parameter
Machining
surface
(only for ShopTurn)
Position
(only for ShopTurn)
(only for ShopTurn)
Machining
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
1. The part program or ShopTurn program to be processed has been cre-
ated and you are in the editor.
2. Press the "Milling" softkey.
3. Press the "Contour milling" and "Path milling" softkeys.
The "Path Milling" input window opens.
mm
mm
*
Description
Face C
•
Face Y
•
Peripheral surface C
•
Peripheral surface Y
•
At the front (face)
•
At the rear (face)
•
Outside (peripheral surface)
•
Inside (peripheral surface)
•
Clamp/release spindle (only for end face Y/peripheral surface Y)
The function must be set up by the machine manufacturer.
∇ (roughing)
•
∇∇∇ (finishing)
•
Chamfering
•
Programming technology functions (cycles)
Parameters, ShopTurn program
T Tool name
D Cutting edge number
F Feedrate
S / V Spindle speed or constant cut-
ting rate
9.5 Contour milling
mm/min
mm/tooth
rpm
m/min
Unit
529