Grid Or Frame Position Pattern (Cycle801) - Siemens SINUMERIK 828D Operating Manual

9.1.13

Grid or frame position pattern (CYCLE801)

Function
● You can use the "Grid position pattern" function (CYCLE801) to program any number of
positions that are spaced at an equal distance along one or several parallel lines.
If you want to program a rhombus-shaped grid, enter angle αX or αY.
● Frame
You can use the "Frame position pattern" function (CYCLE801) to program any number
of positions that are spaced at an equal distance on a frame. The spacing may be
different on both axes.
If you want to program a rhombus-shaped frame, enter angle αX or αY.
Procedure
Parameters - "Grid" position pattern
Parameter
LAB
(only for G code)
PL
(only for G code)
Machining
surface
(only for ShopTurn)
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
1. The part program or ShopTurn program to be processed has been cre-
ated and you are in the editor.
2. Press the "Drilling" softkey.
3. Press the "Positions" softkey.
4. Press the "Grid" softkey.
- OR -
Press the "Frame" softkey.
The "Grid position" or "Frame position" input window opens.
Description
Repeat jump label for position
Machining plane
Face C
•
Face Y
•
Peripheral surface C
•
Peripheral surface Y
•
Programming technology functions (cycles)
9.1 Drilling
Unit
343