Siemens SINUMERIK 828D Operating Manual page 190

Machining the workpiece
5.16 Working with DXF files
Size (for position pattern "Row", "Frame", "Grid")
Circle direction (for circle and partial circle)
Resetting actions
Transfer drilling positions to the cycle and to the program
Operation with keyboard and mouse
In addition to the operation using the softkeys, you can also operate the functions with the
keyboard and the mouse.
190
12. Once the reference point and clearances have been specified, press the
"Select element" softkey repeatedly.
All expansions of the frame or the grid are displayed.
13. Press the "Accept element" softkey to confirm the selected frame or grid.
If all elements for the position row or position frame and position grid are
valid, the drilling positions are displayed with blue points.
Once the reference point and clearance have been specified, press the
"Select element" softkey repeatedly.
The displayed circle is shown in the possible orientations.
Press the "Select element" softkey to confirm the selected circle or par-
tial circle.
If all elements of the circle or partial circle are valid, the drilling positions
are displayed with blue points.
Undo can be used to reset the last actions.
4. Press the "OK" softkey in order to accept the position values.
You return to the associated parameter screen form.
Press the "Accept" softkey to transfer the drilling positions to the pro-
gram.
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Turning