Programming - Siemens SINUMERIK 828D Operating Manual

Computerized numerical controller for machine tools

Hide thumbs Also See for SINUMERIK 828D:

Table of Contents

Creating a ShopTurn program

8.18 Example: Standard machining

Programming

1. Program header

2. Stock removal cycle for facing

Specify the blank.

Measurement unit mm

Tool change point

Machining direction

Press the "Accept" softkey.

The work plan is displayed. Program header and end of program are

created as program blocks.

The end of program is automatically defined.

Press the "Turning" and "Stock removal" softkeys.

Select the machining strategy.

Enter the following technology parameters:

Enter the following parameters:

4000 rev/min

F 0.300 mm/rev

Roughing (∇)

Face (parallel to the X axis)

Operating Manual, 01/2015, 6FC5398-8CP40-5BA2

Sinumerik 840d sl