Siemens SINUMERIK 828D Operating Manual page 387

Computerized numerical controller for machine tools

Hide thumbs Also See for SINUMERIK 828D:

Table of Contents

Hidden parameters

The following parameters are hidden. They are pre-assigned fixed values or values that can

be adjusted using setting data.

Machining plane

Return distance

Multiple threads

Starting angle offset

Operating Manual, 01/2015, 6FC5398-8CP40-5BA2

Thread run-out (inc)

Thread depth (inc)

Infeed slope (flank) or infeed slope (angle)

Infeed along the flank

Infeed with alternating flanks

First infeed depth or number of roughing cuts (only for ∇ and ∇ + ∇∇∇)

Finishing allowance in X and Z – (only for ∇ and ∇ + ∇∇∇)

Number of noncuts - (only for ∇∇∇ and ∇ + ∇∇∇)

Machine manufacturer

Please refer to the machine manufacturer's specifications.

Programming technology functions (cycles)

Can be set in SD

Defined in MD

Sinumerik 840d sl