Table of Contents
Advertisement
Image switching behaviour
5.1.2.3 Displaying camera text
34
Siemens Building Technologies
Fire Safety & Security Products
Switching to more than one monitor:
You define the length of the monitor string for automatic image sequencing here:
Switching to monitor x only (for monitor cycle/preset sequence)
This deactivates the 'Group' and 'Cameras' parameters.
Switching to monitor x...x+n (for monitor cycle)
This activates the 'Group' and 'Camera shift' parameters.
n Images per switching operation
One or more images per switching operation. This is important for group switching.
You can indicate here which images from the camera group should be switched.
Only operating mode 1, Camera number, can be used with the preset sequence (see section 8.2).
Interval time in sec.:
This setting allows you to define how long (in seconds) an image or a camera
group should be displayed before being overwritten.
Only inputs with signal
If this option is active, inputs which have been parameterised in the sequence but
do not supply a signal, are skipped in the image sequence.
If this function key is active, the camera text, as set in the Camera texts dialogue
screen (see section 7), also appears in the camera image.
06.2008
Advertisement
Table of Contents
