Siemens SINUMERIK 828D Operating Manual page 427

Parameter Description
FX (only ShopTurn)
•
FZ (only ShopTurn)
•
FX (only G Code)
•
FZ (only for G code)
•
Machining
•
•
•
Machining
•
direction
•
Position
•
•
•
•
D Maximum depth infeed - (only for ∇)
XDA 1. Grooving limit tool (abs) – (only for face machining direction)
XDB 2. Grooving limit tool (abs) – (only for face machining direction)
UX or U Finishing allowance in X or finishing allowance in X and Z – (only for ∇)
UZ Finishing allowance in Z – (only for UX)
BL Blank description (only for ∇)
•
•
•
XD - (only for ∇ machining)
- (only for blank description, cylinder and allowance)
•
•
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Feedrate in X direction
Feedrate in Z direction
Feedrate in X direction
Feedrate in Z direction
∇ (roughing)
∇∇∇ (finishing)
∇+∇∇∇ (complete machining)
face
longitudinal
front
back
inside
outside
Cylinder (described using XD, ZD)
Allowance (XD and ZD on the finished part contour)
Contour (additional CYCLE62 call with blank contour – e.g. cast iron mold)
For blank description, cylinder
– Version, absolute:
Cylinder dimension ∅ (abs)
– Version incremental:
Allowance (inc) to maximum values of the CYCLE62 finished part contour
For blank description, allowance
– Allowance on the CYCLE62 finished part contour (inc)
Programming technology functions (cycles)
9.3 Contour turning
Unit
mm/rev
mm/rev
*
*
mm
mm
mm
mm
mm
mm
427