Siemens SINUMERIK 828D Operating Manual page 237

Graphic view
The graphic view shows the contour of the workpiece as a dynamic graphic with broken
lines. The program block selected in the work plan is highlighted in color in the graphic view.
Figure 8-2
Parameter screen with help display and graphic view
Note
Switching between the help screen and the graphic view
The key combination <CTRL> + <G> is also available for the switchover between the help
screen and the graphic view.
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Graphic view of a ShopTurn program
1. Press the <Cursor right> key to open a selected program block or
cycle in the work plan.
The associated parameter screen with help display is then dis-
played.
2. Press the "Graphic view" softkey.
The graphic view of the selected program block is displayed.
Creating a ShopTurn program
8.2 Program views
237