Siemens SINUMERIK 828D Operating Manual page 32

Introduction
2.2 Operator panel fronts
32
<TAB> + <SHIFT>
• In the program editor, indents the cursor by one character.
• In the program manager, moves the cursor to the next entry
to the left.
<TAB> + <CTRL>
• In the program editor, indents the cursor by one character.
• In the program manager, moves the cursor to the next entry
to the right.
<TAB> + <SHIFT> + <CTRL>
• In the program editor, indents the cursor by one character.
• In the program manager, moves the cursor to the next entry
to the left.
<CTRL> + <A>
In the actual window, selects all entries (only in the program
editor and program manager).
<CTRL> + <C>
Copies the selected content.
<CTRL> + <E>
Calls the "Ctrl Energy" function.
<CTRL> + <F>
Opens the search dialog in the machine data and setting data
lists, when loading and saving in the MDI editor as well as in the
program manager and in the system data.
<CTRL> + <G>
• Switches in the program editor for ShopMill or ShopTurn
programs between the work plan and the graphic view.
• Switches in the parameter screen between the help display
and the graphic view.
<CTRL> + <L>
Scrolls the actual user interface through all installed languages
one after the other.
<CTRL> + <SHIFT> + <L>
Scrolls the actual user interface through all installed languages
in the inverse sequence.
<CTRL> + <L>
Selects the maximum feedrate of 120% during the simulation.
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Turning