Siemens SINUMERIK 828D Operating Manual page 424

Programming technology functions (cycles)
9.3 Contour turning
Input simple
For simple machining operations, you have the option to reduce the wide variety of
parameters to the most important parameters using the "Input" selection field. In this "Input
simple" mode, the hidden parameters are allocated a fixed value that cannot be adjusted.
If the workpiece programming requires it, you can display and change all of the parameters
using "Input complete".
Machining type
You can freely select the machining type (roughing, finishing or complete machining).
For more detailed information, please refer to section "Stock removal".
Procedure
Parameters in the "Input complete" mode
G code program parameters
Input
PRG Name of the program to be generated
PL Machining plane
RP Retraction plane – (only for
machining direction, longi-
tudinal, inner)
SC Safety clearance
Residual With subsequent residual material removal
material
Yes
•
No
•
CONR Name to save the updated unmachined-part
contour for residual material removal - (only
"Yes" for residual material removal)
424
Machine manufacturer
Various defined values can be pre-assigned using setting data.
Please refer to the machine manufacturer's specifications.
1. The part program or ShopTurn program to be processed has been cre-
ated and you are in the editor.
2. Press the "Contour turning" softkey.
3. Press the "Plunge turning" softkey.
The "Plunge turning" input window opens.
Complete
•
mm
mm
ShopTurn program parameters
T Tool name
D Cutting edge number
S / V Spindle speed or constant cutting
rate
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
rpm
m/min
Turning