Programming technology functions (cycles)
8.1 Drilling
8.1.13
Displaying and hiding positions
Function
You can hide any positions in the following position patterns:
● Position pattern line
● Position pattern grid
● Position pattern frame
● Full circle position pattern
● Pitch circle position pattern
The hidden positions are skipped when machining.
Display
The programmed positions of the position pattern are shown as follows in the programming
graphic:
x
o
Selecting positions
You have the option of either displaying or hiding positions - by activating the checkbox in
the displayed position table either using the keyboard or mouse.
320
Position is activated = displayed (position is shown as a cross)
Position deactivated = hidden (position shown as a circle)
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
Turning