Cleaning A Dxf File - Siemens SINUMERIK 828D Operating Manual

Machining the workpiece
5.16 Working with DXF files
5.16.2.2

Cleaning a DXF file

All contained layers are shown when a DXF file is opened.
Layers that do not contain any contour- or position-relevant data can be shown or hidden.
Procedure
182
1. The DXF file is opened in the Program Manager or in the editor.
2. Press the "Clean" and "Layer selection" softkeys if you want to hide
specific layers.
The "Layer Selection" window opens.
3. Deactivate the required layers and press the "OK" softkey.
- OR -
6. Press the "Clean automat." softkey to hide all non-relevant layers.
7. Press the "Clean automat." softkey to redisplay the layers.
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Turning