Siemens SINUMERIK 828D Operating Manual page 31

Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
<SELECT> + <SHIFT>
Selects in selection lists and in selection boxes the previous
entry or the last entry.
<END>
Moves the cursor to the last entry field in a window, to the end
of a table or a program block.
Selects the last entry in selection lists and in selection boxes.
<END> + <SHIFT>
Moves the cursor to the last entry.
Selects a contiguous selection from the cursor position up to the
end of a program block.
<END> + <CTRL>
Moves the cursor to the last entry in the last line of the actual
column or to the end of a program.
<END> + <CTRL> + <SHIFT>
Moves the cursor to the last entry in the last line of the actual
column or to the end of a program.
Selects a contiguous selection from the cursor position up to the
end of a program block.
<BACKSPACE>
• Editing box
Deletes a character selected to the left of the cursor.
• Navigation
Deletes all of the selected characters to the left of the cursor.
<BACKSPACE> + <CTRL>
• Editing box
Deletes a word selected to the left of the cursor.
• Navigation
Deletes all of the selected characters to the left of the cursor.
<TAB>
• In the program editor, indents the cursor by one character.
• In the program manager, moves the cursor to the next entry
to the right.
Introduction
2.2 Operator panel fronts
31