Siemens SINUMERIK 828D Operating Manual page 425

Parameter Description
FX (only ShopTurn) Feedrate in X direction
FZ (only ShopTurn) Feedrate in Z direction
FX (only G Code) Feedrate in X direction
FZ (only for G code) Feedrate in Z direction
Machining
•
•
•
Machining
•
direction
•
Position
•
•
•
•
D Maximum depth infeed - (only for ∇)
XDA 1. Grooving limit tool (abs) – (only for face machining direction)
XDB 2. Grooving limit tool (abs) – (only for face machining direction)
UX or U Finishing allowance in X or finishing allowance in X and Z – (only for ∇)
UZ Finishing allowance in Z – (only for ∇)
DI For zero: Continuous cut - (only for ∇)
BL Blank description (only for ∇)
•
•
•
XD - (only for ∇ machining)
- (only for blank description, cylinder and allowance)
•
•
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
∇ (roughing)
∇∇∇ (finishing)
∇+∇∇∇ (complete machining)
Face
Longitudinal
front
back
inside
outside
Cylinder (described using XD, ZD)
Allowance (XD and ZD on the finished part contour)
Contour (additional CYCLE62 call with blank contour – e.g. cast iron mold)
For blank description, cylinder
– Version, absolute:
Cylinder dimension ∅ (abs)
– Version incremental:
Allowance (inc) to maximum values of the CYCLE62 finished part contour
For blank description, allowance
Allowance on the CYCLE62 finished part contour (inc)
Programming technology functions (cycles)
9.3 Contour turning
Unit
mm/rev
mm/rev
*
*
mm
mm
mm
mm
mm
mm
mm
425