Siemens SINUMERIK 828D Operating Manual page 163

Procedure
Activating user variables
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
1. Select the "Start-up" operating area.
2. Press the "System data" softkey.
3. In the data tree, select the "NC data" folder and then open the "Defini-
tions" folder.
4. Select the file you want to edit.
5. Double-click the file.
- OR -
Press the "Open" softkey.
- OR -
Press the <INPUT> key.
- OR -
Press the <Cursor right> key.
The selected file is opened in the editor and can be edited there.
6. Define the desired user variable.
7. Press the "Exit" softkey to close the editor.
1. Press the "Activate" softkey.
A prompt is displayed.
2. Select whether the current values in the definition files should be re-
tained
- OR -
Select whether the current values in the definition files should be delet-
ed.
This will overwrite the definition files with the initial values.
3. Press the "OK" softkey to continue the process.
Machining the workpiece
5.11 Display and edit user variables
163