Mounting Positions And Type Of Fixation; Preparing For Mounting - Siemens SIMATIC Mobile Client900WXN Operating Instructions Manual

Installing and connecting the device
3.1 Preparing for installation
Rating plate
The following figure shows an example of a rating plate.
3.1.3

Mounting positions and type of fixation

Mounting position
The wall-mounting bracket is designed for vertical mounting.
The connection box must be installed in a control cabinet.
The connection box is self-ventilated and is approved for all mounting positions. Note that
the guaranteed protection rating is only ensured if the connecting cable or the dummy cap is
plugged into the connection box.
3.1.4

Preparing for mounting

Selecting the mounting location for the wall-mounting bracket
Observe the following points when selecting the mounting location:
● Position the wall-mounting bracket so that the display of the hooked-in HMI device is not
exposed to direct sunlight.
● Position the wall-mounting bracket so that the HMI device can be ergonomically inserted
by the user. Choose a suitable mounting height.
30
Operating Instructions, 04/2015, A5E35883103-AB
Mobile Client900WXN